-40%
NEW Eaton 0-10V Dual Tech Sensor Dimmer (Occupancy) Model OSW-D-010-W White New
$ 20.59
- Description
- Size Guide
Description
NEW Eaton 0-10V Dual Tech Sensor Dimmer (Occupancy)Model OSW-D-010-W White New.
I can work out better shipping costs the more you buy,
If you buy 10, I can ship in factory sealed box.
At check out, pay the shipping, I will refund any over charge, and you pay actual shipping.
Condition is "New". Shipped with USPS First Class.
Top Product Features
• Compatible with dimmable 0-10V LED and FLR ballasts
• Dual Technology Passive Infrared and Ultrasonic sensor technology
• Fully adjustable Auto ON/Manual ON light level settings
• Provides 180 degree field of view with 900 sq. ft. of major and 324 sq. ft. of minor motion coverage
• Selectable time delay of 15 seconds (Test mode), 5 minutes, 10 minutes, 15 minutes, 20 minutes (factory default), 30 minutes
• Adjustable high-end and low-end trim setting
• Push pad design provides minimal travel and crisp actuation
• Digital circuitry provides aesthetically pleasing soft ON/fade OFF
• No leakage to load in OFF mode
• Integrated photocell for daylighting
• Zero crossing for long relay life
Electrical • Neutral is required for installation of device
Wiring type: • Single pole and 3-way • 8” pre-stripped wire leads, • #16 AWG for Load and GND wires • #18 AWG for all other wires
Electrical ratings: 8A 120/277VAC @ 60Hz (LED)
Light Intensity Control: Full-range, continuously variable dimming
Class 2 dimming output section: 0-10 VDC, 80mA maximum current sink. 0-10V output supports up to 40 ballasts/ drivers that draw the standard 2mA each
Surge Protection: Meets ANSI/IEEE Std. C62.41, tested to withstand voltage surges up to 6000V and current surges of up to 3000A
Radio Frequency Interference: Designed to reduce interference with radio, audio and video equipment 0-10VDC FLR and LED ballasts Voltage Ratings: Permanently marked on device label
Flammability: Meets UL 94 requirements; V2 rated